Removal of the Textile Floor Covering of the Cockpit (Carpet)

TASK 25-13-44-000-001-A
Removal of the Textile Floor Covering of the Cockpit (Carpet)

ZONE: 210

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	SCRAPER - NON METALLIC

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 25-11-41-000-001-A	Removal of the Third Occupant Seat
TASK 25-11-51-000-001-A	Removal of the CAPT/F/O Seat
Case Stops
Straps
Textile Floor Covering ** ON A/C NOT FOR ALL
Textile Floor Covering ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 25-13-44-861-050-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-13-44-020-050-A

A. Removal of the Seats
(1) Remove the Third Occupant seat (Ref. AMM TASK 25-11-41-000-001).
(2) If necessary, remove the Captain and the First Officer seats (Ref. AMM TASK 25-11-51-000-001).

Subtask 25-13-44-020-052-A

B. Removal of the Case Stops

Case Stops

(1) Remove the eight screws (1) and washers (2).
(2) Remove the four case stops (3).

Subtask 25-13-44-020-053-A

C. Removal of the Straps

Straps

(1) Remove the 12 screws (1) and washers (2).
(2) Remove the four stirrups (3).
(3) Remove the angle fitting (4).
(4) Remove the two straps (5).

Subtask 25-13-44-020-051-A ** ON A/C NOT FOR ALL

D. Removal of the Textile Floor Covering

Textile Floor Covering ** ON A/C NOT FOR ALL

(1) Remove the 12 screws (5).
(2) Remove the grid (3).
(3) Remove the cover strip (4).
(4) Remove the floor covering (1):
(a) Use the SCRAPER - NON METALLIC to release the carpet from the floor.
(b) Remove the remaining double-sided adhesive tape (2) with the SCRAPER - NON METALLIC.

Subtask 25-13-44-020-051-B ** ON A/C NOT FOR ALL

D. Removal of the Textile Floor Covering

Textile Floor Covering ** ON A/C NOT FOR ALL

(1) Remove the screws (2).
(2) Remove the cover strip (3).
(3) Remove the textile floor covering (1):
(a) Use a SCRAPER - NON METALLIC to release the textile floor covering (1) from the floor.
(b) With the non metallic scrapper, remove the remaining double sided adhesive tape (4).

[Rev.10 from 2021] 2026.03.31 23:29:15 UTC