Replacement of the Latch of Panel 212HW
TASK 25-13-41-960-801-A
Replacement of the Latch of Panel 212HW
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Expendable Parts
C. Referenced Information
3. Job Set-up
Subtask 25-13-41-861-053-A Subtask 25-13-41-865-056-A
Subtask 25-13-41-020-060-A
Subtask 25-13-41-410-052-A
[Rev.10 from 2021]
2026.03.31 23:29:09 UTC
Replacement of the Latch of Panel 212HW
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 212HW |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 6 | LATCH | AIPC 25-13-01-19-130 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
Subtask 25-13-41-861-053-A Subtask 25-13-41-865-056-A
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/AUDIO/ACP/F/O | 5RN | G07 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/AUDIO/FLT/INTPH | 9RN | G08 |
| 49VU | COM/AUDIO/ACP/CAPT | 4RN | G06 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/ACP F/O/BITE/ INT 2 AUDIO/3&5 OCCPNT | 5RN | G07 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/INT/1+2 | 9RN | G08 |
| 49VU | COM/ACP CAPT/SELCAL/INT 1 AUDIO/AVNCS | 4RN | G06 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | PILOTS OUTLETS/STAT INV | 1NA | K25 |
| 121VU | PILOTS OUTLETS/115V 60HZ | 2NA | K23 |
Subtask 25-13-41-020-060-A
A. Removal of Panel 212HW
(1) Remove the screws (1) and the washers (2).
(2) Loosen the fasteners (4).
(3) Remove the panel (3).
Subtask 25-13-41-960-050-A (1) Remove the screws (1) and the washers (2).
(2) Loosen the fasteners (4).
(3) Remove the panel (3).
B. Replacement of the Latch of Panel 212HW
(1) Remove the latch (6) from the door (5) and discard it.
(2) Install the new AIPC 25-13-01-19-130 LATCH (6) on the door (5).
Subtask 25-13-41-420-060-A (1) Remove the latch (6) from the door (5) and discard it.
(2) Install the new AIPC 25-13-01-19-130 LATCH (6) on the door (5).
C. Installation of Panel 212HW:
(1) Put the panel (3) in position.
(2) Install the washers (2) and the screws (1).
(3) Tighten the screws (1).
(4) Lock the fasteners (4).
5. Close-up(1) Put the panel (3) in position.
(2) Install the washers (2) and the screws (1).
(3) Tighten the screws (1).
(4) Lock the fasteners (4).
Subtask 25-13-41-410-052-A
A. Make sure that the work area is clean and clear of tools and other items.
Subtask 25-13-41-865-057-A B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 25-13-41-862-051-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/AUDIO/ACP/F/O | 5RN | G07 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/AUDIO/FLT/INTPH | 9RN | G08 |
| 49VU | COM/AUDIO/ACP/CAPT | 4RN | G06 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/ACP F/O/BITE/ INT 2 AUDIO/3&5 OCCPNT | 5RN | G07 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | COM/INT/1+2 | 9RN | G08 |
| 49VU | COM/ACP CAPT/SELCAL/INT 1 AUDIO/AVNCS | 4RN | G06 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | PILOTS OUTLETS/STAT INV | 1NA | K25 |
| 121VU | PILOTS OUTLETS/115V 60HZ | 2NA | K23 |
Latch of Panel 212HW