DOC AIRBUS | AMM A320FAdjustment of the Cockpit Table
TASK 25-13-14-820-001-A
Adjustment of the Cockpit Table
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 25-13-14-861-056-A 4. Procedure
Subtask 25-13-14-820-050-A
Subtask 25-13-14-942-056-A
[Rev.10 from 2021]
2026.03.31 23:28:46 UTC
Adjustment of the Cockpit Table
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
Adjustment of the Cockpit TableSubtask 25-13-14-861-056-A 4. Procedure
Subtask 25-13-14-820-050-A
A. Adjustment of the Cockpit Table
(1) Make sure that the handle (3) and the handle arms (2), (4) are in the aligned position.
(a) If necessary, loosen or tighten the screw (6) of the stop (5).
(2) Open and close the table (1).
(3) Make sure that the table (1) does not touch the handle (3) and the handle arms (2), (4).
(a) If necessary, loosen or tighten the screws (9) to adjust the position of the sliders (8) in the fittings (7).
5. Close-up(1) Make sure that the handle (3) and the handle arms (2), (4) are in the aligned position.
(a) If necessary, loosen or tighten the screw (6) of the stop (5).
(2) Open and close the table (1).
(3) Make sure that the table (1) does not touch the handle (3) and the handle arms (2), (4).
(a) If necessary, loosen or tighten the screws (9) to adjust the position of the sliders (8) in the fittings (7).
Subtask 25-13-14-942-056-A
A. Make sure that the work area is clean and clear of tools and other items.
Subtask 25-13-14-862-051-A