Painting of the Internal Cockpit Surfaces

TASK 25-13-00-370-001-A
Painting of the Internal Cockpit Surfaces

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 211
ZONE: 212

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CLOTH-EMERY (GRADE 220 - 240)
No specific	AR	PAPER - MASKING
No specific	AR	TAPE - MASKING
No specific	AR	VACUUM CLEANER

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.04JMD9)	Top Coat Polyurethane-- Decorative Furnishing
No specific	ABS 5650B-5316 GREY-BLUE
No specific	ABS 5650B-5317 DARK-BLUE
No specific	ABS 5650B-5330 BLACK
No specific	ASNA 3687-5316 GREY-BLUE
No specific	ASNA 3687-5317 DARK-BLUE
No specific	ASNA 3687-5330 BLACK

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT

D. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A	De-energize the Ground Service Network Supplied from the External Power

3. Job Set-up
Subtask 25-13-00-861-051-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-13-00-370-050-A

A. Painting Procedure
(1) Put PAPER - MASKING and TAPE - MASKING on the area adjacent to the damage.
(2) Remove the damaged paint and primer coatings with CLOTH-EMERY (GRADE 220 - 240).

NOTE: Make sure that the surface is smooth and flat.

(3) Clean the prepared and adjacent areas with a VACUUM CLEANER to remove particles of dust and dirt.
(4) Apply a thin layer of paint of the applicable color Top Coat Polyurethane-- Decorative Furnishing (Material No.04JMD9) .

NOTE: Make sure that the thickness is not more than 25 micrometers.

NOTE: The paint references with color designation used in aircraft cockpits are:
ASNA 3687-5316 GREY-BLUE or ABS 5650B-5316 GREY-BLUE
ASNA 3687-5317 DARK-BLUE or ABS 5650B-5317 DARK-BLUE
ASNA 3687-5330 BLACK or ABS 5650B-5330 BLACK

(5) Remove the masking paper and masking tape.

5. Close-up
Subtask 25-13-00-860-050-A

A. Make sure that the work area is clean and clear of tools and other items.

Subtask 25-13-00-862-051-A

B. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).

[Rev.10 from 2021] 2026.04.01 06:02:27 UTC