Cleaning of the Cockpit Display-Units
TASK 12-21-12-100-001-A
Cleaning of the Cockpit Display-Units
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 12-21-12-861-051-A 4. Procedure
Subtask 12-21-12-160-062-A ** ON A/C NOT FOR ALL
Subtask 12-21-12-862-051-A
[Rev.10 from 2021]
2026.03.31 22:56:12 UTC
Cleaning of the Cockpit Display-Units
ZONE: 210
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 210 | CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 22-82-12-100-001-A | Cleaning of the Multipurpose Control Display Unit (MCDU) |
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 24-42-00-862-001-A | De-energize the Ground Service Network Supplied from the External Power |
| TASK 31-63-22-100-001-A | Cleaning of the Display Unit |
| TASK 34-22-25-100-001-A | Cleaning of the ISIS Indicator |
Subtask 12-21-12-861-051-A 4. Procedure
Subtask 12-21-12-160-062-A ** ON A/C NOT FOR ALL
A. Cleaning of the Cockpit Display Units
(1) Clean the instrument panel Display Unit (DU) (Ref. AMM TASK 31-63-22-100-001).
(2) Clean the Multipurpose Control Display Unit (MCDU) (Ref. AMM TASK 22-82-12-100-001).
(3) Make sure that the work area is clean and clear of tools and other items.
Subtask 12-21-12-160-062-B ** ON A/C NOT FOR ALL (1) Clean the instrument panel Display Unit (DU) (Ref. AMM TASK 31-63-22-100-001).
(2) Clean the Multipurpose Control Display Unit (MCDU) (Ref. AMM TASK 22-82-12-100-001).
(3) Make sure that the work area is clean and clear of tools and other items.
A. Cleaning of the Cockpit Display Units
(1) Clean the instrument panel Display Unit (DU) (Ref. AMM TASK 31-63-22-100-001).
(2) Clean the multipurpose control Display Unit(s) (MCDU) (Ref. AMM TASK 22-82-12-100-001).
(3) Clean the indicator of the Integrated Standby Instrument System (ISIS) if installed (Ref. AMM TASK 34-22-25-100-001).
(4) Make sure that the work area is clean and clear of tools and other items.
5. Close-up(1) Clean the instrument panel Display Unit (DU) (Ref. AMM TASK 31-63-22-100-001).
(2) Clean the multipurpose control Display Unit(s) (MCDU) (Ref. AMM TASK 22-82-12-100-001).
(3) Clean the indicator of the Integrated Standby Instrument System (ISIS) if installed (Ref. AMM TASK 34-22-25-100-001).
(4) Make sure that the work area is clean and clear of tools and other items.
Subtask 12-21-12-862-051-A
Cockpit Display Units