General Visual Inspection of Aft Emergency Exit including Door Stops on Fuselage Door Frames (EWIS)

TASK 05-28-30-200-805-A
General Visual Inspection of Aft Emergency Exit including Door Stops on Fuselage Door Frames (EWIS)

ZONE: 835
ZONE: 845

1. Reason for the Job
Refer to the MPD TASK: ZL-835-01
GENERAL VISUAL INSPECTION OF AFT EMERGENCY EXIT INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAMES (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
835	MID PASSENGER/CREW DOOR
845	MID PASSENGER/CREW DOOR
835, 845

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-22-00-010-002-A	Opening of the Emergency Exit Doors from the Outside
TASK 52-22-00-410-002-A	Closing of the Emergency Exit Doors from the Outside
Aft Emergency-Exit Door which includes the Door Stops on Fuselage Door Frames

3. Job Set-up
Subtask 05-28-30-010-066-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zone 835 (845).
(2) Open aft emergency-exit door 835 ( 845) (Ref. AMM TASK 52-22-00-010-002).

4. Procedure
Subtask 05-28-30-210-071-A ** ON A/C NOT FOR ALL

A. Inspection

Aft Emergency-Exit Door which includes the Door Stops on Fuselage Door Frames ** ON A/C NOT FOR ALL

(1) Do a general visual inspection of the aft emergency-exit doors. This inspection includes the door stops on the fuselage door frames.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations are attached correctly.

5. Close-up
Subtask 05-28-30-410-066-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Close aft emergency-exit door 835 ( 845) (Ref. AMM TASK 52-22-00-410-002).
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.03.31 22:51:04 UTC