W DOC AIRBUS | AMM A320F

General Visual Inspection of FWD and AFT Emergency Exits including Door Stops on Fuselage Door Frames (EWIS)


TASK 05-28-30-200-011-A
General Visual Inspection of FWD and AFT Emergency Exits including Door Stops on Fuselage Door Frames (EWIS)


ZONE: 833
ZONE: 834
ZONE: 843
ZONE: 844
1. Reason for the Job
Refer to the MPD TASK: ZL-833-04
GENERAL VISUAL INSPECTION OF FWD AND AFT EMERGENCY EXITS INCLUDING DOOR STOPS ON FUSELAGE DOOR FRAMES (EWIS)
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
833
EMERGENCY EXITS
834
EMERGENCY EXITS
843
EMERGENCY EXITS
844
EMERGENCY EXITS
833, 834, 843, 844
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 52-22-00-010-002-A
Opening of the Emergency Exit Doors from the Outside
TASK 52-22-00-410-002-A
Closing of the Emergency Exit Doors from the Outside
3. Job Set-up
Subtask 05-28-30-010-056-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zones 833 ( 843) and 834 ( 844).
   (2) Open emergency exit doors 833 ( 843) and 834 ( 844) (Ref. AMM TASK 52-22-00-010-002).
4. Procedure
Subtask 05-28-30-210-060-A ** ON A/C NOT FOR ALL
A. Inspection
   (1) Do a general visual inspection of the forward and aft emergency exits. This inspection includes the door stops on the fuselage door frames.
   (2) Make sure that there are no signs of corrosion, cracks or damage.
   (3) Make sure that all the installations are attached correctly.
5. Close-up
Subtask 05-28-30-410-056-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Close emergency exit doors 833 ( 843) and 834 ( 844) (Ref. AMM TASK 52-22-00-410-002).
   (2) Remove the access platform(s).
[Rev.10 from 2021] 2026.03.31 22:51:01 UTC