W DOC AIRBUS | AMM A320F

GENERAL VISUAL INSPECTION OF PYLON REAR SECONDARY STRUCTURE (EWIS)

TASK 05-24-70-210-803-A
GENERAL VISUAL INSPECTION OF PYLON REAR SECONDARY STRUCTURE (EWIS)

ZONE: 475
ZONE: 476
ZONE: 485
ZONE: 486
1. Reason for the Job
Refer to the MPD TASK: ZL-475-01
GENERAL VISUAL INSPECTION OF PYLON REAR SECONDARY STRUCTURE (EWIS)
NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 2M (6 FT)
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
475
REAR PYLON
476
REAR PYLON
485
REAR PYLON
486
REAR PYLON
475AL, 475BL, 485AL, 485BL
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 54-54-00-000-802-A
Removal of the Rear Pylon Fairing (RPF)
TASK 54-54-00-400-802-A
Installation of the Rear Pylon Fairing (RPF)
F Location of the Access Panels of the Left Pylon (Left Side)
F Location of the Access Panels of the Right Pylon (Left Side)
3. Job Set-up
Subtask 05-24-70-010-053-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Put an ACCESS PLATFORM 2M (6 FT) in position at zone 470 (480).
   (2) Remove the access panels (Ref. AMM TASK 54-54-00-000-802):
4. Procedure
Subtask 05-24-70-210-053-A ** ON A/C NOT FOR ALL
A. Do a general visual inspection of the pylon rear secondary-structure.
Make sure that:
  • There is no damage (corrosion, leaks or cracks) on all the parts of the components and the structure that you can see
  • All the installations (wiring, piping) are correctly attached.
5. Close-up
Subtask 05-24-70-410-053-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Install the access panels (Ref. AMM TASK 54-54-00-400-802):
   (3) Remove the access platform(s).
[Rev.10 from 2021] 2026.03.31 22:50:04 UTC
"Aviabrain" 2025