GENERAL VISUAL INSPECTION OF NOSE GEAR WELL (EWIS)

TASK 05-21-20-200-012-A
GENERAL VISUAL INSPECTION OF NOSE GEAR WELL (EWIS)

ZONE: 123
ZONE: 124

1. Reason for the Job
Refer to the MPD TASK: ZL-123-02
GENERAL VISUAL INSPECTION OF NOSE GEAR WELL (EWIS)

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
123	NOSE GEAR WELL
124	NOSE GEAR WELL

B. Referenced Information

REFERENCE	DESIGNATION
TASK 32-22-00-010-001-A	Nose Gear Doors - Ground Doors Opening
TASK 32-22-00-410-001-A	Nose Gear Doors - Ground Doors Closing

3. Job Set-up
Subtask 05-21-20-010-062-A

A. Get Access
(1) Open the nose landing gear doors 713 and 714 (Ref. AMM TASK 32-22-00-010-001).

4. Procedure
Subtask 05-21-20-210-061-A

A. Inspection
(1) Do a general visual inspection of the nose gear well (Zones 123 and 124).
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations (wiring, ducting, piping) are attached correctly.

5. Close-up
Subtask 05-21-20-410-062-A

A. Close Access
(1) Close the nose landing gear doors 713 and 714. (Ref. AMM TASK 32-22-00-410-001)

[Rev.10 from 2021] 2026.03.31 22:48:34 UTC