Loss of the DME2 Data on the RMI

TASK 34-57-00-810-809-A
Loss of the DME2 Data on the RMI

1. Possible Causes

RMI-VOR/ADF/DME [21FN]
wiring of the DME2 bus from the VOR/ADF/DME RMI (21FN) to the first terminal block
INTRG-DME, 2 [2SD2]
wiring of the DISTANCE DATA OUTPUT 2 bus from the DME2 interrogator (2SD2) to the first terminal block

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TSM TASK 34-51-00-810-814-A	Loss of the DME 2 Data on the ND
AMM 34-51-00-720-001	Functional Test of the DME
AMM 34-51-00-740-002	BITE Test of the DME
AMM 34-51-33-000-001	Removal of the DME Interrogator
AMM 34-51-33-400-001	Installation of the DME Interrogator
ASM 345701
AMM 34-57-22-000-002	Removal of the VOR/ADF/DME RMI
AMM 34-57-22-400-002	Installation of the VOR/ADF/DME RMI

3. Fault Confirmation
Subtask 34-57-00-720-056-A ** ON A/C NOT FOR ALL

A. Test
(1) Do the functional test of the DME AMM 34-51-00-720-001.

4. Fault Isolation
Subtask 34-57-00-810-061-B ** ON A/C NOT FOR ALL

A. If during the test, the right window does not give the DME2 distance values:

(1) If it does not come into view and if the right window of the RMI shows dashes:

(2) If it does not come into view and if the right window of the RMI is blank:

(a) If the fault continues:

do a check and repair the wiring of the DME2 bus from the VOR/ADF/DME RMI (21FN) to the first terminal block ASM 345701.

(3) If it comes on and if the right window of the RMI is blank:

(a) If the BITE test gives a maintenance message:

(b) If the BITE test does not give a maintenance message:

1 If the fault continues:

do a check and repair the wiring of the DISTANCE DATA OUTPUT 2 bus from the DME2 interrogator (2SD2) to the first terminal block ASM 345701.

Subtask 34-57-00-720-057-A ** ON A/C NOT FOR ALL

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:33:33 UTC