PTP - Fault on the Programming and Test Panel

TASK 23-73-00-810-867-A
PTP - Fault on the Programming and Test Panel

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TSM TASK 23-73-00-810-856-A	PTP - Fault in the Programming and Test Panel
AMM 23-73-18-000-001	Removal of the Programming and Test Panel
AMM 23-73-18-400-001	Installation of the Programming and Test Panel
AMM 23-73-34-000-001	Removal of the CIDS Director
AMM 23-73-34-400-001	Installation of the CIDS Director

3. Fault Confirmation
Subtask 23-73-00-710-172-A ** ON A/C NOT FOR ALL

A. Test
(1) Do the PTP test through the CFDS.
(2) Use the PTP to control some system statuses, tests and programming.

4. Fault Isolation
Subtask 23-73-00-810-404-A ** ON A/C NOT FOR ALL

A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.

Subtask 23-73-00-810-405-A ** ON A/C NOT FOR ALL

B. If the CFDS gives the maintenance message P & T PNL 110RH:

do the trouble shooting for the CFDS maintenance message P & T PNL 110RH (Ref. TSM TASK 23-73-00-810-856).

Subtask 23-73-00-810-406-A ** ON A/C NOT FOR ALL

C. If the CFDS gives no P & T PNL fault message and you cannot control the PTP controlled system tests through the PTP:

replace the PROGRAMMING AND TEST PANEL [110RH] AMM 23-73-18-000-001 and AMM 23-73-18-400-001.

(1) If the fault continues:

Subtask 23-73-00-710-221-A ** ON A/C NOT FOR ALL

D. Do the test given in Para. 3.A.

[Rev.8 from Aug 2018] 2026.04.04 04:25:53 UTC