W DOC AIRBUS | TSM A320F

Pack 1 Controller (ACSC 1) Fault - Outlet Temperature / Compressor Outlet Temperature Indication replaced by Amber XX


TASK 21-61-00-810-853-A
Pack 1 Controller (ACSC 1) Fault - Outlet Temperature / Compressor Outlet Temperature Indication replaced by Amber XX


1. Possible Causes
  • P1 CONTROLLER [7HH]
  • wiring
  • CONT-AIR COND SYSTEM 1 [47HH]
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
TSM TASK 21-61-00-810-820-A
Pack 1 Electrical Component with Short Circuit (AIR PACK 1 REGUL FAULT)
AMM 21-61-00-710-001
Operational Test of the Pack Temperature-Control System
ASM 216103
AMM 21-61-34-000-001
Removal of the Pack Controller
AMM 21-61-34-000-002
Removal of the Air-Conditioning System Controller
AMM 21-61-34-400-001
Installation of the Pack Controller
AMM 21-61-34-400-002
Installation of the Air-Conditioning System Controller
ASM 216302
3. Fault Confirmation
Subtask 21-61-00-710-140-A ** ON A/C NOT FOR ALL
A. Do the operational test of the pack temperature-control system AMM 21-61-00-710-001.
NOTE: If a fault is detected, the PC gives a fault code for shop maintenance in addition to the related CFDS message(s) (refer to TSM chapter 21-63-00, page block 301).
Subtask 21-61-00-710-140-B ** ON A/C NOT FOR ALL
A. Do the operational test of the pack temperature-control system AMM 21-61-00-710-001.
4. Fault Isolation
Subtask 21-61-00-810-169-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message P1 CONT:
   (1) If the fault continues:
  • do a check and repair the wiring if necessary between:
    PC 1 (7HH) connector AA/5A and CB (1HH),
    PC 1 (7HH) connector AA/5B and GND,
    PC 1 (7HH) connector AB/13D and CB (2HH),
    PC 1 (7HH) connector AB/14A and GND ASM 216103.
   (2) If the fault continues:
  • do a check and repair if necessary the wiring of the signal:
    ARINC 429 XTR (M) from the ZC (8HK) to the PC 1 (7HH),
    ARINC 429 XTR (S) from the ZC (8HK) to the PC 1 (7HH),
    ARINC 429 RCV (S) from the ZC (8HK) to the PC 1 (7HH) ASM 216302.
   (3) If the fault continues:
Subtask 21-61-00-810-169-B ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message ACSC1(47HH):
   (1) If the fault continues:
Subtask 21-61-00-710-141-A
B. Do the test as given in the Para. 3.A.
[Rev.8 from Aug 2018] 2026.04.04 04:24:55 UTC