Engine Oil Filter Change and Magnetic Chip Detector Inspection [PW11]

TASK 79-35-00-040-802-A
Engine Oil Filter Change and Magnetic Chip Detector Inspection

ZONE: 400

1. Reason for the Job
MMEL 79-09-02A
ENG 1(2) OIL FILTER CLOG ALERT
MMEL 79-09-04B
ENG 1(2) OIL FILTER DEGRAD ALERT
MMEL 79-09-05B
ENG 1(2) OIL SENSOR FAULT ALERT
MMEL 79-09-07B
ENG 1(2) OIL FILTER - PARTLY CLOGGED ALERT
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
400	POWER PLANT, NACELLES AND PYLONS

B. Referenced Information

REFERENCE	DESIGNATION
TASK 79-00-00-281-802-A	Inspection of the Magnetic Chip Collectors for Oil Contamination
TASK 79-21-06-960-801-A	Replace the Oil Filter Element

3. Job Set-up
Subtask 79-35-00-860-050-A ** ON A/C NOT FOR ALL

A. Non Applicable

4. Procedure
Subtask 79-35-00-960-050-A ** ON A/C NOT FOR ALL

A. Do the replacement of the Oil Filter Element (Ref. AMM TASK 79-21-06-960-801)

Subtask 79-35-00-281-050-A ** ON A/C NOT FOR ALL

B. Do the oil analysis of the Magnetic Chip Collector (Ref. AMM TASK 79-00-00-281-802)

5. Close-up
Subtask 79-35-00-860-054-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Make an entry in the logbook to record that the Oil Filter element has been changed and the Magnetic Chip Detector inspected

[Rev.10 from 2021] 2026.04.01 03:42:30 UTC