Installation of the Manual Drive Unit (MDU) Cap [PW11]

TASK 78-31-00-040-802-A
Installation of the Manual Drive Unit (MDU) Cap

1. Reason for the Job
CDL 78-21
Manual Drive Unit
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	Torque wrench: range to between 3.30 and 2.70 m.daN (24.34 and 19.91 lbf.ft )
CH144037	1	TRANSPORTATION CAPS

B. Referenced Information

REFERENCE	DESIGNATION
TASK 71-13-00-010-802-A	Opening of the Fan Cowl Doors
TASK 71-13-00-410-802-A	Closing of the Fan Cowl Doors
TASK 78-31-05-000-801-A	Removal of the Manual Drive Unit (MDU)

3. Job Set-up
Subtask 78-31-00-010-070-A ** ON A/C NOT FOR ALL

A. Open the Fan Cowl Doors (Ref. AMM TASK 71-13-00-010-802)

4. Procedure
Subtask 78-31-00-000-053-A ** ON A/C NOT FOR ALL

A. Remove the applicable MDU (Ref. AMM TASK 78-31-05-000-801)

Subtask 78-31-00-400-050-A ** ON A/C NOT FOR ALL

B. Installation of the MDU Cap
(1) Install cap CH144037 TRANSPORTATION CAPS on the locking actuator MDU port.
(2) TORQUE the cap to between 3.30 and 2.70 m.daN (24.34 and 19.91 lbf.ft )

5. Close-up
Subtask 78-31-00-410-065-A ** ON A/C NOT FOR ALL

A. Close the Fan Cowl Doors (Ref. AMM TASK 71-13-00-410-802)

Subtask 78-31-00-860-084-A ** ON A/C NOT FOR ALL

B. Aircraft Maintenance Configuration
(1) Make an entry in the logbook to record that the MDU Cap has been installed

[Rev.10 from 2021] 2026.04.01 03:30:53 UTC