Table of Idle Indications [IAE]

TASK 71-00-00-860-011-C
Table of Idle Indications

1. Reason for the Job
This task is for A5 basic (non SelectOne) engines, which have not SBE 72-0565 (SelectOne retrofit standard) or SBE 72-0560, SBE 72-0561, SBE 72-0562, SBE 72-0563, SBE 72-0564 and SBE 73-0203 (SelectOne production standard) incorporated.
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 71-00-00-700-011-B	Test No.13 : Pretested Replacement Engine Test
TASK 71-00-00-710-012-B	Test No.3 : Idle Leak Check
TASK 71-00-00-710-013-C	Test No.11 : High Power Assurance Test
TASK 71-00-00-710-043-A	Normal Engine Automatic-Start Procedure
TASK 71-00-00-710-047-A	Normal Engine Manual-Start Procedure
Engine Idle Indications (PRE SBE 72-0565 or PRE SBE 72-0560/72-0561/72-0562/ 72-0563/72-0564/73-0203)

3. Job Set-up
Subtask 71-00-00-970-059-A ** ON A/C NOT FOR ALL

A. Reason for Tables
(1) The tables are included to specify normal engine operation when referenced by the procedures:

(2) Tables are provided for engine operation at minimum idle.
(3) Tables apply for static ground test only, after the engines have thermally stabilized.

Subtask 71-00-00-970-060-A ** ON A/C NOT FOR ALL

B. Parameter values
(1) Tolerances apply to all listed data.
(2) Altitude corrections apply to atmospheric pressure.
(3) Outside Air Temperature (OAT) is in degrees Celsius (deg C).

NOTE: Take the OAT in the shade at the airplane nose gear.

(4) To convert from kg/hr to lb/hr, multiply by 2.2046.
To convert from lb/hr to kg/hr, multiply by 0.4536.

4. Procedure
Subtask 71-00-00-860-177-A ** ON A/C NOT FOR ALL

A. Table of Idle Parameters
(1) Refer to the assurance tables.

NOTE: Aircraft/engines bleed configuration for the Table of Idle Parameters is:
- Bleeds OFF
- Environmental Control System (ECS) bleeds OFF

Engine Idle Indications (PRE SBE 72-0565 or PRE SBE 72-0560/72-0561/72-0562/ 72-0563/72-0564/73-0203) ** ON A/C NOT FOR ALL

[Rev.10 from 2021] 2026.04.01 02:27:55 UTC