Prime the Engine Fuel and Oil Systems [PW11]

TASK 71-00-00-610-802-A
Prime the Engine Fuel and Oil Systems

1. Reason for the Job
Use this procedure to prime the engine fuel and oil systems after the engine is replaced.
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 71-00-00-860-825-A	Motor the Engine (Wet Method)
TASK 79-00-00-610-801-A	Check and Fill the Engine Oil

3. Job Set-up
Subtask 71-00-00-869-350-A ** ON A/C NOT FOR ALL

A. Not Applicable

4. Procedure
Subtask 71-00-00-613-050-A ** ON A/C NOT FOR ALL

A. Prime the Engine Fuel and Oil Systems
(1) Check the oil level. Fill the engine with oil, if necessary (Ref. AMM TASK 79-00-00-610-801).
(a) Do the engine motor leak test (wet method) (Ref. AMM TASK 71-00-00-860-825).

[Rev.10 from 2021] 2026.04.01 02:31:17 UTC