Electrical Standard Practices [CFML]

TASK 70-70-00-910-804-A
Electrical Standard Practices

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 70-27-00-910-809-A	Cleaning of Contact Points and Wiring Harness (with Pre-Clean)
TASK 70-70-00-910-806-A	Vendor Code, Name and Address
TASK 70-70-00-910-807-A	Backshell Lockwire Procedure
TASK 70-71-31-910-801-A	Harness General

3. Job Set-up
Subtask 70-70-00-860-055-A

A. Not Applicable

4. Procedure
Subtask 70-70-00-910-057-A

A. Electrical Standard Practices

NOTE: This chapter is not applicable to the European Conformity Certificate (ECC) Control Harnesses.

(1) All the data in Chapter/Section 70-7X are related to the CFM LEAP-1A Power Plant only. The location of the data for the repair of all the harness connectors and wires is shown below:

SUBJECT	TAKS
Harness General	(Ref. AMM TASK 70-71-31-910-801)
Harness Cleaning	(Ref. AMM TASK 70-27-00-910-809)
Vendor Code, Name and Address	(Ref. AMM TASK 70-70-00-910-806)
Backshell Lockwire Procedure	(Ref. AMM TASK 70-70-00-910-807)

[Rev.10 from 2021] 2026.04.01 05:45:46 UTC