Removal of the Emergency Exit-Hatch Window

TASK 56-31-17-000-001-A
Removal of the Emergency Exit-Hatch Window

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	GLOVES - COTTON, LINT-FREE, CLEAN

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-47-000-001-A	Removal of the Lining from the Emergency Exit Hatches
Emergency Exit-Hatch - Location and Detail ** ON A/C NOT FOR ALL
Emergency Exit-Hatch - Location and Detail ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 56-31-17-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Remove the applicable lining panel (Ref. AMM TASK 25-23-47-000-001).

4. Procedure
Subtask 56-31-17-000-050-A ** ON A/C NOT FOR ALL

A. Removal

NOTE: you must use GLOVES - COTTON, LINT-FREE, CLEAN when you touch the window panes and the components.

(1) Remove the retainer attach nuts (4) and the retainer (3). Do not damage the protective surfaces of the retainer.
(2) Remove the window assembly (2) from the window frame (1).
(3) If you must disassemble the window assembly (2), do the steps that follow:
(a) Remove the outer pane (6) from the rubber seal (7).
(b) Remove the inner pane (8) from the rubber seal (7). Put the panes on a soft clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1) .

[Rev.10 from 2021] 2026.04.01 02:08:05 UTC