Removal of the Bulk Cargo-Compartment Floor-Panels

TASK 53-42-17-000-001-A
Removal of the Bulk Cargo-Compartment Floor-Panels

NOTE: For the FINs of the bulk cargo-compartment floor-panels, refer to DO 06-41-53-00.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE
No specific	1	SCRAPER - NON METALLIC

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
162KF

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-006-A	Open the Bulk Cargo-Compartment Door
TASK 52-71-12-000-003-A	Removal of the Proximity Switch
Bulk Cargo-Compartment Floor-Panels - Zone 160

3. Job Set-up
Subtask 53-42-17-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the AFT cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position below the AFT cargo-compartment door.

Subtask 53-42-17-010-050-B ** ON A/C NOT FOR ALL

A. Get Access
(1) Put the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position below the BULK cargo-compartment door.
(2) Open the BULK cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
(3) For panel 162KF remove the Proximity Switch 50WV (Ref. AMM TASK 52-71-12-000-003).

4. Procedure
Subtask 53-42-17-020-051-A

A. Remove the Floor Panels
(1) Find the end of the cord (4).
(2) Pull the cord up to remove the sealant from between the floor panels (2).
(3) Remove the sealant from between the cutouts and the tiedown positions with a SCRAPER - NON METALLIC.
(4) Remove the screws (1).
(5) Remove the floor panels (2) and the seals (3), (5), (6) and (7).

[Rev.10 from 2021] 2026.04.01 03:47:19 UTC