Local Repair of the Fuel Tank Sealant
TASK 51-76-12-300-001-A
Local Repair of the Fuel Tank Sealant
1. Reason for the Job
General repair of fuel leaks.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 51-76-12-941-050-A
Subtask 51-76-12-160-050-A
Subtask 51-76-12-942-050-A
[Rev.10 from 2021]
2026.04.01 01:34:46 UTC
Local Repair of the Fuel Tank Sealant
1. Reason for the Job
General repair of fuel leaks.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | SCRAPER - NON METALLIC |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 12-11-28-650-001-A | General Refuel/Defuel Safety Procedures |
| TASK 28-00-00-910-001-A | Fuel Safety Procedures |
| TASK 28-10-00-910-001-A | Safety Procedures When You Do Work in a Fuel Tank |
| TASK 28-10-00-910-002-A | Access to the Fuel Tanks and the Work Areas |
| SRM 517612 |
Subtask 51-76-12-941-050-A
A. Obey the fuel safety procedures (Ref. AMM TASK 28-00-00-910-001), (Ref. AMM TASK 28-10-00-910-001) and (Ref. AMM TASK 28-10-00-910-002).
Subtask 51-76-12-650-050-A Subtask 51-76-12-010-050-A C. Get access to the fuel leak area.
4. ProcedureSubtask 51-76-12-160-050-A
A. Preparation for the Repair
(2) Chamfer the edges of the sealant that is not damaged.
(3) Clean the repair area with the Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint free-cloth Textile-Lint free Cotton - (Material No.14SBA1) .
Subtask 51-76-12-914-050-A Subtask 51-76-12-650-051-A Subtask 51-76-12-790-050-A CAUTION:
DO NOT USE A METAL SCRAPER TO REMOVE THE UNWANTED MATERIAL. A METAL SCRAPER CAN CAUSE DAMAGE TO THE SURFACE OF THE COMPONENT.
(1) Remove the sealant from around the leak point area for a minimum distance of 75 mm (2.9528 in.) with a SCRAPER - NON METALLIC. (2) Chamfer the edges of the sealant that is not damaged.
(3) Clean the repair area with the Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint free-cloth Textile-Lint free Cotton - (Material No.14SBA1) .
D. Examine the repair area for leaks.
5. Close-upNOTE: Leaks are not permitted.
(1) If there are leaks, refer to SRM 51-76-12, P. Block 1, for corrective action. Subtask 51-76-12-942-050-A
A. Remove the ground support and maintenance equipment, the special and standard tools and all other items.