Cleaning of the Full-Face Smoke Mask

TASK 35-32-51-110-001-A
Cleaning of the Full-Face Smoke Mask

WARNING: KEEP ALL HYDROCARBONS (FUELS, LUBRICANTS, ETC.) AWAY FROM ALL SOURCE OF OXYGEN. OXYGEN BECOMES EXPLOSIVE WHEN IT TOUCHES HYDROCARBONS.

WARNING: CLEAN THE TOOLS AND MAKE SURE YOUR HANDS ARE CLEAN TO PREVENT CONTAMINATION OF THE OXYGEN SYSTEM.

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
To clean and disinfect the full-face smoke masks.
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.11EAA1)	Disinfectant and deodorant-Oxygen Mask - -
No specific	lint-free cloth

B. Referenced Information

REFERENCE	DESIGNATION
TASK 35-32-51-210-001-A	Inspection/Check of the Full-Face Smoke Mask

3. Job Set-up
Subtask 35-32-51-010-051-A ** ON A/C NOT FOR ALL

A. Get access to the cabin.

4. Procedure
Subtask 35-32-51-210-050-A ** ON A/C NOT FOR ALL

A. Examine the smoke masks for condition (Ref. AMM TASK 35-32-51-210-001).

Subtask 35-32-51-210-051-A ** ON A/C NOT FOR ALL

B. Examine the stowage containers of the smoke masks for condition.

Subtask 35-32-51-670-050-A ** ON A/C NOT FOR ALL

C. Apply Disinfectant and deodorant-Oxygen Mask - - (Material No.11EAA1) to the inner surfaces of the smoke masks with a lint-free cloth.

5. Close-up
Subtask 35-32-51-410-051-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to the serviceable condition.
(1) Put the smoke masks in their stowage containers.
(2) Make sure that the work area is clean and clear of tools and other items.

[Rev.9 from 2019] 2026.04.01 01:05:40 UTC