Installation of the Avionics-Compartment Dome Lights
TASK 33-35-11-400-002-A
Installation of the Avionics-Compartment Dome Lights
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Expendable Parts
D. Referenced Information
3. Job Set-up
Subtask 33-35-11-865-054-A
Subtask 33-35-11-420-052-B
Subtask 33-35-11-410-051-A
[Rev.10 from 2021]
2026.04.01 00:54:35 UTC
Installation of the Avionics-Compartment Dome Lights
CAUTION:
DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS.
THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP.
IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.
ZONE: 121
ZONE: 122
ZONE: 125
ZONE: 126
ZONE: 127
ZONE: 128
FIN: 10LS
FIN: 22LS
FIN: 6LS
FIN: 7LS
FIN: 8LS
FIN: 9LS
1. Reason for the JobZONE: 122
ZONE: 125
ZONE: 126
ZONE: 127
ZONE: 128
FIN: 10LS
FIN: 22LS
FIN: 6LS
FIN: 7LS
FIN: 8LS
FIN: 9LS
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| FOR [10LS] (LT-DOME, AVIONICS COMPT AFT R) | ||
| FOR [9LS] (LT-DOME, AVIONICS COMPT AFT L) | ||
| No specific | AR | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| FOR [22LS] (LT-DOME, AVIONICS COMPT LAT L) | ||
| No specific | AR | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| FOR [6LS] (LT-DOME, AVIONICS COMPT FWD R) | ||
| FOR [7LS] (LT-DOME, AVIONICS COMPT FWD L) | ||
| No specific | AR | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| FOR [8LS] (LT-DOME, AVIONICS COMPT LAT R) | ||
| No specific | AR | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 121 | AVIONICS COMPARTMENT |
| 122 | AVIONICS COMPARTMENT |
| 125 | LATERAL AVIONIC COMPARTMENT |
| 126 | LATERAL AVIONIC COMPARTMENT |
| 127 | REAR AVIONIC COMPARTMENT |
| 128 | REAR AVIONIC COMPARTMENT |
| FOR [10LS] (LT-DOME, AVIONICS COMPT AFT R) | |
| FOR [9LS] (LT-DOME, AVIONICS COMPT AFT L) | |
| 824 | |
| FOR [22LS] (LT-DOME, AVIONICS COMPT LAT L) | |
| 812 | |
| FOR [6LS] (LT-DOME, AVIONICS COMPT FWD R) | |
| FOR [7LS] (LT-DOME, AVIONICS COMPT FWD L) | |
| 811 | |
| FOR [8LS] (LT-DOME, AVIONICS COMPT LAT R) | |
| 822 | |
| FIG.ITEM | DESIGNATION | IPC-CSN |
|---|---|---|
| 1 | BULB | AIPC 33-35-11-01-060 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 33-35-00-720-001-A | Functional Test of the Avionics-Compartment Lighting |
| FOR [10LS] (LT-DOME, AVIONICS COMPT AFT R) | |
| FOR [9LS] (LT-DOME, AVIONICS COMPT AFT L) | |
| TASK 52-41-00-410-002-A | Close the Avionics Compartment Doors after Access |
Subtask 33-35-11-865-054-A
A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
Subtask 33-35-11-010-052-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 122VU | LIGHTING/AVNCS COMPT/DOME | 1LS | Z07 |
B. Get access to the avionics compartment.
(1) FOR [6LS] (LT-DOME, AVIONICS COMPT FWD R), [7LS] (LT-DOME, AVIONICS COMPT FWD L)
4. Procedure(1) FOR [6LS] (LT-DOME, AVIONICS COMPT FWD R), [7LS] (LT-DOME, AVIONICS COMPT FWD L)
- make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position at the zone 121,
- make sure that the door 811 is open.
- make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position at the zone 124,
- make sure that the door 822 is open.
- make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position at the zone 128,
- make sure that the door 824 is open.
- make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position at the zone 123,
- make sure that the door 812 is open.
Subtask 33-35-11-420-052-B
A. Installation of the dome light
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Remove the CAP-BLANKING from each electrical connector and receptacle.
(5).
(4) Install a new dome light (4) in its housing (3).
Hold it in this position.
(5) Lock the new dome light (4) with the three screws (2).
(6) Make sure that the electrical connectors (5) are in the correct condition.
(7) Connect the electrical connectors (5).
Subtask 33-35-11-420-053-B (1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Remove the CAP-BLANKING from each electrical connector and receptacle.
(5).
(4) Install a new dome light (4) in its housing (3).
Hold it in this position.
(5) Lock the new dome light (4) with the three screws (2).
(6) Make sure that the electrical connectors (5) are in the correct condition.
(7) Connect the electrical connectors (5).
B. Installation of the bulb
(1) Install a new AIPC 33-35-11-01-060 BULB (1).
(2) Put the cover (6) in position on the dome light (4).
Hold it in this position.
(3) Lock the cover (6) with the three captive screws (7).
Subtask 33-35-11-865-055-A (1) Install a new AIPC 33-35-11-01-060 BULB (1).
(2) Put the cover (6) in position on the dome light (4).
Hold it in this position.
(3) Lock the cover (6) with the three captive screws (7).
C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 33-35-11-720-051-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 122VU | LIGHTING/AVNCS COMPT/DOME | 1LS | Z07 |
D. Functional Test of the Avionics-Compartment Dome Lights
(1) Do the functional test of the avionics-Compartment Lighting (Ref. AMM TASK 33-35-00-720-001).
5. Close-up(1) Do the functional test of the avionics-Compartment Lighting (Ref. AMM TASK 33-35-00-720-001).
Subtask 33-35-11-410-051-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the avionics compartment doors
(a) FOR [6LS] (LT-DOME, AVIONICS COMPT FWD R), [7LS] (LT-DOME, AVIONICS COMPT FWD L)
close the door 811,
(b) FOR [8LS] (LT-DOME, AVIONICS COMPT LAT R)
close the door 822,
(c) FOR [9LS] (LT-DOME, AVIONICS COMPT AFT L), [10LS] (LT-DOME, AVIONICS COMPT AFT R)
close the door 824, (Ref. AMM TASK 52-41-00-410-002)
(d) FOR [22LS] (LT-DOME, AVIONICS COMPT LAT L)
812 close the door.
(3) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the avionics compartment doors
(a) FOR [6LS] (LT-DOME, AVIONICS COMPT FWD R), [7LS] (LT-DOME, AVIONICS COMPT FWD L)
close the door 811,
(b) FOR [8LS] (LT-DOME, AVIONICS COMPT LAT R)
close the door 822,
(c) FOR [9LS] (LT-DOME, AVIONICS COMPT AFT L), [10LS] (LT-DOME, AVIONICS COMPT AFT R)
close the door 824, (Ref. AMM TASK 52-41-00-410-002)
(d) FOR [22LS] (LT-DOME, AVIONICS COMPT LAT L)
812 close the door.
(3) Remove the access platform(s).
Avionics-Compartment Dome Lights