Installation of the Lighting Controller

TASK 33-13-51-400-001-A
Installation of the Lighting Controller

ZONE: 211
ZONE: 212
FIN: 16LF
FIN: 30LF
FIN: 6LF

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
FOR [16LF] (CONTROLLER-LIGHTING)
FOR [30LF] (CONTROLLER-LIGHTING)
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT
FOR [16LF] (CONTROLLER-LIGHTING)
FOR [30LF] (CONTROLLER-LIGHTING)
811

C. Referenced Information

REFERENCE	DESIGNATION
TASK 33-13-00-710-001-A	Operational Test of the Instrument and Panel Integral-Lighting

3. Job Set-up
Subtask 33-13-51-865-051-A

A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
FOR FIN: 6LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/OVHD/PNL	3LF	Y03
FOR FIN: 16LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/MAIN INST/PNL AND/PED	4LF	Y04
FOR FIN: 30LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/GLARE/SHLD	5LF	Y05

Subtask 33-13-51-010-051-A

B. Get Access
(1) FOR [16LF] (CONTROLLER-LIGHTING), [30LF] (CONTROLLER-LIGHTING)
Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position at the zone 121.
(2) Make sure that the access door 811 is open.
(a) FOR [16LF] (CONTROLLER-LIGHTING), [30LF] (CONTROLLER-LIGHTING)
811
(3) FOR [6LF] (CONTROLLER-LIGHTING)
Make sure that the ceiling panel 211HC is removed.

4. Procedure
Subtask 33-13-51-420-050-A

A. Installation of the Lighting Controller
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Remove the blanking caps from the electrical connectors (4) and (5).
(4) Put the lighting controller (1) in position opposite its housing (6). Hold it in this position.
(5) Install the lighting controller (1) with the lockwashers (2) and the four screws(3).

Subtask 33-13-51-865-052-A

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
FOR FIN: 6LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/OVHD/PNL	3LF	Y03
FOR FIN: 16LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/MAIN INST/PNL AND/PED	4LF	Y04
FOR FIN: 30LF (CONTROLLERLIGHTING)
122VU	LIGHTING/INSTL LT/GLARE/SHLD	5LF	Y05

Subtask 33-13-51-710-050-A

C. Do the operational test of the lighting controller (Ref. AMM TASK 33-13-00-710-001)

5. Close-up
Subtask 33-13-51-410-050-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) FOR [6LF] (CONTROLLER-LIGHTING)
Install the ceiling panel 211HC with an ALLEN wrench.
(3) Close the access door 811.
(a) FOR [16LF] (CONTROLLER-LIGHTING), [30LF] (CONTROLLER-LIGHTING)
811
(4) FOR [16LF] (CONTROLLER-LIGHTING), [30LF] (CONTROLLER-LIGHTING)
Remove the access platform(s).

[Rev.10 from 2021] 2026.04.01 00:52:59 UTC