Installation of the Integrally-Lighted Identification Plate

TASK 33-13-44-400-801-A
Installation of the Integrally-Lighted Identification Plate

ZONE: 210
ZONE: 211
ZONE: 212
FIN: 32LF
FIN: 33LF

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
210	CKPT,FWD COMPT BHD TO FLT COMPT BULKHEAD
211	COCKPIT
212	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 33-13-00-710-001-A	Operational Test of the Instrument and Panel Integral-Lighting
Integrally-Lighted Identification Plate

3. Job Set-up
Subtask 33-13-44-865-051-A

A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/INSTL LT/GLARE/SHLD	5LF	Y05

4. Procedure
Subtask 33-13-44-420-050-A

A. Installation of the Integrally-Lighted Identification Plate (33LF)
(1) Put the integrally-lighted identification plate (3) in position on the CAPTAIN glareshield panel 131VU (1).
(2) Install and tighten the four screws (2).
(3) Push the CAPTAIN glareshield panel 131VU (1).

Subtask 33-13-44-420-051-A

B. Installation of the Integrally-Lighted Identification Plate (32LF)
(1) Put the integrally-lighted identification plate (5) in position on the F/O glareshield panel 130VU (4).
(2) Install and tighten the four screws (6).
(3) Push the F/O glareshield panel 130VU (4).

Subtask 33-13-44-865-052-A

C. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/INSTL LT/GLARE/SHLD	5LF	Y05

Subtask 33-13-44-710-050-A

D. Do the operational test of the instrument and panel integral lighting (Ref. AMM TASK 33-13-00-710-001).

5. Close-up
Subtask 33-13-44-942-050-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 00:52:56 UTC