Installation of the Console and Briefcase Light

TASK 33-12-15-400-001-A
Installation of the Console and Briefcase Light

CAUTION: DO NOT TOUCH THE LAMP GLASS WITH YOUR FINGERS. THE OILS FROM YOUR SKIN WILL QUICKLY CAUSE DETERIORATION OF THE LAMP. IF YOU ACCIDENTALLY TOUCH THE LAMP GLASS, CLEAN IT WITH A LINT-FREE CLOTH.

ZONE: 190

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
190	BELLY FAIR, AIR CONDITIONING & HYD COMPT

B. Expendable Parts

FIG.ITEM	DESIGNATION	IPC-CSN
2	BULB	AIPC 33-12-15-01-010

C. Referenced Information

REFERENCE	DESIGNATION
TASK 33-12-00-710-001-A	Operational Test of the General Illumination
Console and Briefcase Light ** ON A/C NOT FOR ALL
Console and Briefcase Light ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 33-12-15-865-051-A

A. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05

Subtask 33-12-15-941-050-A

B. Aircraft Maintenance Configuration
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.

4. Procedure
Subtask 33-12-15-420-050-A ** ON A/C NOT FOR ALL

A. Installation of the Light
(1) Install the AIPC 33-12-15-01-010 BULB (2)

NOTE: Make sure that the bulb (2) is in the correct position in the cover (3).

(2) Put the cover (3) in position in the housing (1).

NOTE: Make sure that the cover (3) is locked correctly.

Subtask 33-12-15-420-050-B ** ON A/C NOT FOR ALL

A. Installation of the Console and Briefcase Light
(1) Remove the CAP-BLANKING from each electrical connector and receptacle.
Make sure that the electrical connector(s) is (are) clean and in the correct condition.

CAUTION: REFER TO THE MATCH MARKS MADE DURING THE REMOVAL WHEN YOU CONNECT THE ELECTRICAL WIRES. INCORRECT CONNECTION OF THE WIRES WILL CAUSE DAMAGE TO EQUIPMENT.

(2) Connect the female terminal lugs (3) and (4) to the male terminal lugs (5) and (6).
(3) Put the cover (2) in position in its housing.
(4) Make sure that the cover (2) is correctly locked.

Subtask 33-12-15-865-052-A

B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/FLOOD/F/O/SIDE	4LE	Z06
122VU	LIGHTING/FLOOD/CAPT/SIDE	5LE	Z05

Subtask 33-12-15-710-050-A

C. Test
(1) Do the operational test of the light (Ref. AMM TASK 33-12-00-710-001).

5. Close-up
Subtask 33-12-15-942-050-A

A. Aircraft Maintenance Configuration
(1) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 06:01:01 UTC