Reactivation of the Nose - Wheel Steering Electrical Deactivation - Box (for Flight)

TASK 32-51-00-440-002-A
Reactivation of the Nose - Wheel Steering Electrical Deactivation - Box (for Flight)

WARNING: MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING GEAR. THIS WILL PREVENT UNWANTED MOVEMENT OF THE LANDING GEAR, AND THUS POSSIBLE INJURY TO PERSONS AND DAMAGE TO THE AIRCRAFT AND/OR EQUIPMENT.

WARNING: MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROLS SURFACES ARE CLEAR. MOVEMENT OF FLIGHT CONTROLS CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE TO EQUIPMENT.

WARNING: MAKE SURE THAT THE CONTROLS AGREE WITH THE POSITION OF THE ITEMS THEY OPERATE BEFORE YOU PRESSURIZE A HYDRAULIC SYSTEM. UNWANTED MOVEMENT OF HYDRAULICALLY OPERATED ITEMS CAN CAUSE SERIOUS INJURY AND/OR DAMAGE.

WARNING: PRESSURIZE ONLY THE HYDRAULIC SYSTEM(S) THAT IS (ARE) NECESSARY FOR THE TASK. ISOLATE THE OTHER HYDRAULIC SYSTEM(S) BEFORE YOU SUPPLY HYDRAULIC POWER TO THE AIRCRAFT.

WARNING: MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.

1. Reason for the Job
MMEL 32-51-03B
NWS ELECTRICAL DEACTIVATION BOX
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 32-51-12-000-001-A	Removal of the Nose - Wheel Steering Electrical Deactivation - Box
TASK 32-51-12-400-001-A	Installation of the Nose - Wheel Steering Electrical Deactivation - Box

3. Job Set-up
Subtask 32-51-00-941-063-A

A. Preparation for Reactivation
(1) Remove the tie wraps and the temporary attachment from the blanking cap and the electrical harness.
(2) Remove the temporary placard installed in the cockpit.

4. Procedure
Subtask 32-51-00-440-050-A

A. Reactivation of the Nose - Wheel Steering Electrical Deactivation - Box 5GC
(1) Replace the nose - wheel steering electrical deactivation - box (Ref. AMM TASK 32-51-12-000-001) and (Ref. AMM TASK 32-51-12-400-001).

[Rev.10 from 2021] 2026.04.01 00:50:52 UTC