Replacement of the Nose Wheel

TASK 32-41-00-440-004-A
Replacement of the Nose Wheel

1. Reason for the Job
MMEL 32-41-01A
NOSE WHEEL TIE BOLT
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 32-41-12-000-001-A	Removal of the NLG Wheel
TASK 32-41-12-400-001-A	Installation of the NLG Wheel

3. Job Set-up
Subtask 32-41-00-941-064-A

A. Not Applicable

4. Procedure
Subtask 32-41-00-440-055-A

A. Replacement of the Wheel
(1) Remove the related NLG wheel (Ref. AMM TASK 32-41-12-000-001).
(2) Inspection of the wheel
(a) Send the wheel to the overhaul facility.
(b) Remove and discard the two tie bolts (one on each side) adjacent to the missing one.
(c) Refer to the applicable CMM to inspect all of the wheel for damage.
(3) Install a new wheel (Ref. AMM TASK 32-41-12-400-001).

5. Close-up
Subtask 32-41-00-942-059-A

A. Removal of Equipment
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Delete the entry in the log book.

[Rev.10 from 2021] 2026.04.01 00:47:04 UTC