Check of the Nose Wheel when one tie bolt is missing

TASK 32-41-00-040-002-A
Check of the Nose Wheel when one tie bolt is missing

1. Reason for the Job
MMEL 32-41-01A
NOSE WHEEL TIE BOLT
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 32-41-12-000-001-A	Removal of the NLG Wheel (for corrective action)
TASK 32-41-12-400-001-A	Installation of the NLG Wheel (for corrective action)

3. Job Set-up
Subtask 32-41-00-941-056-A

A. Not applicable

4. Procedure
Subtask 32-41-00-210-073-A

A. Check of the related Nose Wheel
(1) Make sure that no broken pieces of the tie bolt are in the wheel. If there are pieces of the tie bolt in the wheel, remove them.
(2) Do a check of the wheel for damage, no damage is permitted.

NOTE: If the wheel is damaged, refer to the AMM (Ref. AMM TASK 32-41-12-000-001) and (Ref. AMM TASK 32-41-12-400-001) to replace the wheel.

5. Close-up
Subtask 32-41-00-942-055-A

A. Aircraft Maintenance Configuration
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Make an entry in the logbook.

[Rev.10 from 2021] 2026.04.01 00:47:03 UTC