Check of the Green, Yellow or Blue Hydraulic System after Operation in an Overheat Condition

TASK 29-00-00-280-005-A
Check of the Green, Yellow or Blue Hydraulic System after Operation in an Overheat Condition

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 12-32-29-281-001-A	Analyze Hydraulic Fluid
TASK 12-36-29-600-001-A	Change of the Hydraulic Fluid in the Green Hydraulic System - with Ground Cart Available
TASK 12-36-29-600-002-A	Change of the Hydraulic Fluid in the Yellow Hydraulic System - with Ground Cart Available
TASK 12-36-29-600-003-A	Change of the Hydraulic Fluid in the Blue Hydraulic System - with Ground Cart Available

3. Job Set-up
Subtask 29-00-00-860-077-A

A. There is no special job set-up for this task.

4. Procedure
Subtask 29-00-00-281-050-A

A. Sample Check of the Hydraulic Fluid
(1) If you operate the aircraft for more than one flight in an overheat condition (OVHT warning on the ECAM display), do the subsequent work:
(a) Do a sample check of the hydraulic fluid of the related hydraulic system (Ref. AMM TASK 12-32-29-281-001).
(b) Make sure that the fluid properties are in the limits.

Subtask 29-00-00-611-053-A

B. Replace the hydraulic fluid of the related hydraulic system , if the fluid properties are not in the limits (Ref. AMM TASK 12-36-29-600-001), (Ref. AMM TASK 12-36-29-600-002) or (Ref. AMM TASK 12-36-29-600-003).

[Rev.10 from 2021] 2026.04.01 00:13:33 UTC