DOC AIRBUS | AMM A320FRead-out for Class 3 Faults in the Slat System
TASK 27-81-00-740-001-A
Read-out for Class 3 Faults in the Slat System
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 27-81-00-941-054-A
Subtask 27-81-00-869-051-A
Subtask 27-81-00-942-054-A
[Rev.10 from 2021]
2026.03.31 23:56:20 UTC
Read-out for Class 3 Faults in the Slat System
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | WARNING NOTICE(S) |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 31-32-00-869-002-A | Procedure for the Class 3 Fault Reading |
Subtask 27-81-00-941-054-A
A. Safety Precautions
(1) Put a WARNING NOTICE(S) in position to tell persons not to operate the slats.
4. Procedure(1) Put a WARNING NOTICE(S) in position to tell persons not to operate the slats.
Subtask 27-81-00-869-051-A
A. Read-out for Class 3 Faults in the Slat System
5. Close-upWARNING:
MAKE SURE THAT ALL THE CIRCUITS IN MAINTENANCE ARE ISOLATED BEFORE YOU SUPPLY ELECTRICAL POWER TO THE AIRCRAFT. UNWANTED ELECTRICAL POWER CAN BE DANGEROUS.
(1) Read for class 3 faults in the slat system (Ref. AMM TASK 31-32-00-869-002). Subtask 27-81-00-942-054-A
A. Removal of Equipment
(1) Remove the WARNING NOTICE(S).
(1) Remove the WARNING NOTICE(S).