Remove Yaw Damper Centering Spring Rod for in Shop Operational Check

TASK 27-26-41-280-001-A
Remove Yaw Damper Centering Spring Rod for in Shop Operational Check

ZONE: 325

1. Reason for the Job
Refer to the MPD TASK: 272100-04
REMOVE YAW DAMPER SPRING ROD FOR IN SHOP OPERATIONAL CHECK.
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
325	VERTICAL STABILIZER TRAILING EDGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 27-26-41-000-001-A	Removal of the Centering Spring Rod for the Actuator of the Yaw Damper Servo
TASK 27-26-41-400-001-A	Installation of the Centering Spring Rod for the Actuator of the Yaw Damper Servo

3. Job Set-up
Subtask 27-26-41-020-051-A

A. Remove the centering spring rod of the yaw damper (Ref. AMM TASK 27-26-41-000-001).

4. Procedure
Subtask 27-26-41-280-050-A

A. Do an operational check of the yaw damper centering spring rod in the workshop.

5. Close-up
Subtask 27-26-41-420-051-A

A. Install the centering spring rod of the yaw damper (Ref. AMM TASK 27-26-41-400-001).

[Rev.10 from 2021] 2026.03.31 23:49:48 UTC