Removal of the Remote-Control Panel (RCP) (Emergency Locator Transmitter)

TASK 25-65-18-000-001-A
Removal of the Remote-Control Panel (RCP) (Emergency Locator Transmitter)

ZONE: 200
FIN: 111MX ** ON A/C NOT FOR ALL

1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	CAP - BLANKING

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
RCP 111MX ** ON A/C NOT FOR ALL
RCP 111MX ** ON A/C NOT FOR ALL
RCP 111MX ** ON A/C NOT FOR ALL
RCP 111MX ** ON A/C NOT FOR ALL
RCP 111MX ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 25-65-18-861-050-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-65-18-861-050-J ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-65-18-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the RCP 111MX

RCP 111MX ** ON A/C NOT FOR ALL

(1) Hold the front face of the RCP (1) and loosen the captive screws (3).
(2) Carefully remove the RCP (1) until you can get access to the electrical connector (4).
(3) Disconnect the electrical connector (4) and remove the RCP (1).
(4) Put CAP - BLANKING on the disconnected electrical connectors.

Subtask 25-65-18-020-050-J ** ON A/C NOT FOR ALL

A. Removal of the RCP 111MX

RCP 111MX ** ON A/C NOT FOR ALL

[Rev.10 from 2021] 2026.03.31 23:41:15 UTC