DOC AIRBUS | AMM A320FRemoval of the Net Stanchions in the Aft and/or Bulk Cargo Compartment
TASK 25-55-17-000-001-A
Removal of the Net Stanchions in the Aft and/or Bulk Cargo Compartment
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-55-17-010-050-A ** ON A/C NOT FOR ALL
Subtask 25-55-17-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.01 12:43:32 UTC
Removal of the Net Stanchions in the Aft and/or Bulk Cargo Compartment
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | 1 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 150 | AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT |
| 160 | BULK CARGO COMPARTMENT AFT BULKHEAD OF AFT CARGO COMPARTMENT TO AFT BULKHEAD OF BULK CARGO COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-30-00-860-006-A | Open the Bulk Cargo-Compartment Door |
Subtask 25-55-17-010-050-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Open the aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo compartment door.
Subtask 25-55-17-010-050-B ** ON A/C NOT FOR ALL (1) Open the aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo compartment door.
A. Get Access
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the opening of the aft cargo-compartment door.
(4) Set the light switch to on.
(5) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the bulk cargo-compartment door.
(6) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
Subtask 25-55-17-010-050-C ** ON A/C NOT FOR ALL (1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the opening of the aft cargo-compartment door.
(4) Set the light switch to on.
(5) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the bulk cargo-compartment door.
(6) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the bulk cargo-compartment door.
(2) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
Subtask 25-55-17-010-050-D ** ON A/C NOT FOR ALL (1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the bulk cargo-compartment door.
(2) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
A. Get Access
(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment door.
(3) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the bulk cargo-compartment door.
(4) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
(5) Put a WARNING NOTICE(S) in position on the control panel of the aft cargo loading-system (CLS) to tell persons not to use it.
Subtask 25-55-17-865-053-A (1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo-compartment door.
(3) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the bulk cargo-compartment door.
(4) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).
(5) Put a WARNING NOTICE(S) in position on the control panel of the aft cargo loading-system (CLS) to tell persons not to use it.
B. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2001VU | SEMI AUTO CLS-AFT | 103MY | D08 |
| 2001VU | SEMI AUTO CLS-AFT | 102MY | D06 |
Subtask 25-55-17-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Net Stanchion
Stanchion - Door Net - AFT Cargo Compartment ** ON A/C NOT FOR ALL
Stanchion - Door Net - Aft Cargo Compartment ** ON A/C NOT FOR ALL
Stanchion - Door Net - Aft Cargo Compartment ** ON A/C NOT FOR ALL
(1) Disconnect the net fittings from the applicable net attachment fittings of the cargo compartment floor and the ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).
Subtask 25-55-17-020-050-CK ** ON A/C NOT FOR ALL Stanchion - Door Net - AFT Cargo Compartment ** ON A/C NOT FOR ALL Stanchion - Door Net - Aft Cargo Compartment ** ON A/C NOT FOR ALL Stanchion - Door Net - Aft Cargo Compartment ** ON A/C NOT FOR ALL (2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).
A. Removal of the Net Stanchion
(1) Disconnect the net fittings from the applicable net attachment fittings of the cargo compartment floor and ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).
Subtask 25-55-17-020-050-CM ** ON A/C NOT FOR ALL (1) Disconnect the net fittings from the applicable net attachment fittings of the cargo compartment floor and ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).
A. Removal of the Net Stanchion
(1) Disconnect the net fittings from the applicable net attachment fittings of the cargo compartment floor and ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).
(1) Disconnect the net fittings from the applicable net attachment fittings of the cargo compartment floor and ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).