Removal of the Aft Cargo-Compartment Partition at FR47
TASK 25-55-11-000-001-A
Removal of the Aft Cargo-Compartment Partition at FR47
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-55-11-010-050-B
Subtask 25-55-11-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:39:16 UTC
Removal of the Aft Cargo-Compartment Partition at FR47
ZONE: 150
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 150 | AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
Subtask 25-55-11-010-050-B
A. Get Access
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo compartment door.
(4) Set the light switch to on.
(5) If the MECHANISED BULK CARGO LOADING SYSTEM is installed:
(a) Remove the side guides (Ref. AMM D/O 25-52-15-00).
Subtask 25-55-11-865-067-A (1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the aft cargo compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the aft cargo compartment door.
(4) Set the light switch to on.
(5) If the MECHANISED BULK CARGO LOADING SYSTEM is installed:
(a) Remove the side guides (Ref. AMM D/O 25-52-15-00).
B. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2001VU | SEMI AUTO CLS-AFT | 103MY | D08 |
| 2001VU | SEMI AUTO CLS-AFT | 102MY | D06 |
Subtask 25-55-11-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Aft Cargo Compartment Partition FR47
(2) Loosen the studs (5) of the partition panels (1), (2) and (3).
(3) Remove the partition panels (1), (2) and (3).
Subtask 25-55-11-020-050-B ** ON A/C NOT FOR ALL WARNING:
USE GOGGLES AND PROTECTIVE CLOTHING WHEN YOU REMOVE, INSTALL OR TORQUE THE FASTENER.
IF PARTS OF THE FASTENER RELEASE SUDDENLY, THERE IS A RISK OF INJURY.
(1) Safety the partition panels (1), (2) and (3). (2) Loosen the studs (5) of the partition panels (1), (2) and (3).
(3) Remove the partition panels (1), (2) and (3).
A. Removal of the Aft Cargo-Compartment Partition at FR47
(2) Loosen the studs (5) of the partition panels (1), (2) and (3).
(3) Remove the partition panels (1), (2) and (3).
WARNING:
USE GOGGLES AND PROTECTIVE CLOTHING WHEN YOU REMOVE, INSTALL OR TORQUE THE FASTENER.
IF PARTS OF THE FASTENER RELEASE SUDDENLY, THERE IS A RISK OF INJURY.
(1) Safety the partition panels (1), (2) and (3). (2) Loosen the studs (5) of the partition panels (1), (2) and (3).
(3) Remove the partition panels (1), (2) and (3).
AFT Cargo - Compartment Partition FR47/51