DOC AIRBUS | AMM A320FRemoval of the Net Stanchions in the Forward Cargo Compartment
TASK 25-54-17-000-001-A
Removal of the Net Stanchions in the Forward Cargo Compartment
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-54-17-010-050-A ** ON A/C NOT FOR ALL
Subtask 25-54-17-020-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 23:39:06 UTC
Removal of the Net Stanchions in the Forward Cargo Compartment
ZONE: 130
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | 1 | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 130 | FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-30-00-480-001-A | Installation of the Safety Support Equipment |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
Stanchion - Door Net - Forward Cargo CompartmentSubtask 25-54-17-010-050-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
Subtask 25-54-17-010-050-B ** ON A/C NOT FOR ALL (1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
A. Get Access
(1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Install the safety lock on the actuator of the forward cargo-compartment door (Ref. AMM TASK 52-30-00-480-001).
(3) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
(4) Put a WARNING NOTICE(S) in position on the control panel of the forward Cargo Loading-System (CLS) to tell persons not to use it.
Subtask 25-54-17-865-053-A ** ON A/C NOT FOR ALL (1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Install the safety lock on the actuator of the forward cargo-compartment door (Ref. AMM TASK 52-30-00-480-001).
(3) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
(4) Put a WARNING NOTICE(S) in position on the control panel of the forward Cargo Loading-System (CLS) to tell persons not to use it.
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | SEMI AUTO CLS-FWD | 3MY | E08 |
| 2000VU | SEMI AUTO CLS-FWD | 2MY | E06 |
Subtask 25-54-17-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Net Stanchions
(1) Disconnect the net fittings from the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).
(1) Disconnect the net fittings from the applicable net attachment fittings of the cargo-compartment floor and ceiling areas.
(2) Remove the stanchion (2):
(a) Turn the locking base (3) counterclockwise to unlock the stanchion from the tie-down point (4).
(b) Push the stanchion (2) up to release the stanchion locking base (3) from the tie-down point (4).
(c) Move the lower part of the stanchion (2) away from the tie-down point (4).
(d) Move the stanchion (2) down to remove the stanchion plunger from the upper ceiling fitting (1).