Removal of the Forward Cargo-Compartment Partition
TASK 25-54-12-000-001-A
Removal of the Forward Cargo-Compartment Partition
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 25-54-12-010-050-A ** ON A/C NOT FOR ALL
Subtask 25-54-12-020-050-A
Forward Cargo-Compartment Partition FR34 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR35.5 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR34 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR35.5 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR34 ** ON A/C NOT FOR ALL
(2) Remove the partition panels (1), (2) and (3).
(3) Loosen the studs (8) of the valve (4).
(4) Remove the valve (4) and the cover assembly (7).
[Rev.10 from 2021]
2026.04.01 03:46:31 UTC
Removal of the Forward Cargo-Compartment Partition
ZONE: 130
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | WARNING NOTICE(S) |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 130 | FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
Subtask 25-54-12-010-050-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
(3) Put a WARNING NOTICE(S) in position on the control panel of the forward cargo-loading system to tell persons not to use it.
Subtask 25-54-12-010-050-B ** ON A/C NOT FOR ALL (1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
(3) Put a WARNING NOTICE(S) in position on the control panel of the forward cargo-loading system to tell persons not to use it.
A. Get Access
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
(4) Set the light switch to on.
(5) If the MECHANISED BULK CARGO LOADING SYSTEM is installed:
(a) Remove the side guides (Ref. AMM D/O 25-52-15-00).
Subtask 25-54-12-865-073-A (1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(3) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward cargo-compartment door.
(4) Set the light switch to on.
(5) If the MECHANISED BULK CARGO LOADING SYSTEM is installed:
(a) Remove the side guides (Ref. AMM D/O 25-52-15-00).
B. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 2000VU | SEMI AUTO CLS-FWD | 3MY | E08 |
| 2000VU | SEMI AUTO CLS-FWD | 2MY | E06 |
Subtask 25-54-12-020-050-A
WARNING:
USE GOGGLES AND PROTECTIVE CLOTHING WHEN YOU REMOVE, INSTALL OR TORQUE THE FASTENER.
IF PARTS OF THE FASTENER RELEASE SUDDENLY, THERE IS A RISK OF INJURY.
A. Removal of the Forward Cargo-Compartment Partition at FR34 or FR35.1 or FR35.5
Forward Cargo-Compartment Partition FR34 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR35.5 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR34 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR35.5 ** ON A/C NOT FOR ALL
Forward Cargo-Compartment Partition FR34 ** ON A/C NOT FOR ALL NOTE: The removal of each partition panel is the same.
(1) Loosen the studs (5) of the partition panels (1), (2) and (3). (2) Remove the partition panels (1), (2) and (3).
(3) Loosen the studs (8) of the valve (4).
(4) Remove the valve (4) and the cover assembly (7).