W DOC AIRBUS | AMM A320F

Removal of the Forward Cargo-Compartment Partition FR24A


TASK 25-54-11-000-001-A
Removal of the Forward Cargo-Compartment Partition FR24A


ZONE: 130
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
No specific
AR
WARNING NOTICE(S)
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
130
FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 25-52-46-000-002-A
Removal of the Upper Y-Guide
TASK 52-30-00-860-001-A
Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
3. Job Set-up
Subtask 25-54-11-860-051-A
A. Aircraft Maintenance Configuration
   (1) Open the forward cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
   (2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at the opening of the forward cargo-compartment door.
   (3) Put a WARNING NOTICE(S) in position on the control panel of the forward cargo-compartment loading-system to tell persons not to use it.
Subtask 25-54-11-010-050-A ** ON A/C NOT FOR ALL
B. Get Access
   (1) Remove the upper Y-guide (Ref. AMM TASK 25-52-46-000-002).
Subtask 25-54-11-865-055-A
C. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2000VUSEMI AUTO CLS-FWD3MYE08
2000VUSEMI AUTO CLS-FWD2MYE06
4. Procedure
Subtask 25-54-11-020-050-A ** ON A/C NOT FOR ALL
A. Removal of forward cargo-compartment partition FR24A
   (1) Remove the forward cargo-compartment partition-panels (6), (7) and (8) as follows:
     (a) Loosen the studs (1) of the cover assies (2) and remove the cover assies (2).
     (b) Loosen the studs (3) of the cover strip assies (4) and remove the cover strip assies (4).
     (c) Loosen the studs (5) of the partition panels (6), (7) and (8).
     (d) Remove the partition panels (6), (7) and (8).
   (2) If necessary, remove the protection panels (2) as follows:
     (a) Loosen the screws (5), the washers (7) and the nuts (8) from the protection panels (2) and the supports (3).
     (b) Remove the protection panels (2).
     (c) Loosen the screws (4) from the partition panels (1).
     (d) Remove the supports (3).
Subtask 25-54-11-020-050-B ** ON A/C NOT FOR ALL
A. Removal of forward cargo-compartment partition FR24A
   (1) Remove the forward cargo-compartment partition-panels (1), (2) and (3) as follows:
     (a) Loosen the studs (8), the washers (9) and the lock washers (18) of the partition panels (1), (2) and (3).
     (b) Remove the partition panels (1), (2) and (3).
   (2) If necessary, remove the protection panels (4), (5), (6) and (7) as follows:
     (a) Loosen the screws (14) from the protection panels (4), (5), (6) and (7) and the supports (13).
     (b) Remove the protection panels (4), (5), (6) and (7).
     (c) Loosen the screws (12) from the partition panels (1) and (2).
     (d) Remove the supports (13).
[Rev.10 from 2021] 2026.03.31 23:38:52 UTC