W DOC AIRBUS | AMM A320F

Removal of the Joystick


TASK 25-52-71-000-001-A
Removal of the Joystick


ZONE: 130
ZONE: 150
FIN: 4MY ** ON A/C NOT FOR ALL
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 2M (6 FT)
No specific
1
CAP - BLANKING
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
No specific
1
WARNING NOTICE(S)
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
130
FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
150
AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 25-52-67-000-001-A
Removal of the Control Panel
TASK 52-30-00-860-001-A
Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
3. Job Set-up
Subtask 25-52-71-010-050-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Open the forward and/or aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
   (2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the applicable cargo compartment door(s).
   (3) Put the WARNING NOTICE(S) near the applicable control panel of the cargo loading system to tell persons not to use it.
Subtask 25-52-71-865-057-A ** ON A/C NOT FOR ALL
B. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2000VUSEMI AUTO CLS-FWD3MYE08
2000VUSEMI AUTO CLS-FWD2MYE06
2001VUSEMI AUTO CLS-AFT103MYD08
2001VUSEMI AUTO CLS-AFT102MYD06
Subtask 25-52-71-010-051-A ** ON A/C NOT FOR ALL
C. Remove the control panel to get access to the joystick (Ref. AMM TASK 25-52-67-000-001).
4. Procedure
Subtask 25-52-71-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Joystick
   (1) Remove the screws (4).
   (2) Disconnect the electrical connector (1) from the receptacle (2).
   (3) Put the CAP - BLANKING on the electrical connector (1) and on the receptacle (2).
   (4) Pull the joystick (3) out of the control panel (7).
[Rev.10 from 2021] 2026.03.31 23:38:42 UTC