Removal of the Control Panel

TASK 25-52-67-000-001-A
Removal of the Control Panel

ZONE: 130
ZONE: 150

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
130	FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
150	AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Control Panel 2020VU

3. Job Set-up
Subtask 25-52-67-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the forward and/or aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).

Subtask 25-52-67-865-057-A ** ON A/C NOT FOR ALL

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	SEMI AUTO CLS-FWD	3MY	E08
2000VU	SEMI AUTO CLS-FWD	2MY	E06
2001VU	SEMI AUTO CLS-AFT	103MY	D08
2001VU	SEMI AUTO CLS-AFT	102MY	D06

4. Procedure
Subtask 25-52-67-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Control Panel 2020VU in the Forward and/or Aft Cargo Compartment
(1) Remove the insulation near the control panel (2) to get access to the screws (3).
(2) Hold the control panel (2).
(3) Remove the screws (3) from the control panel (2) and the structure (5).
(4) Carefully lower the control panel (2) to get access to the electrical connector (1).
(5) Disconnect the electrical connector (1) from the receptacle (4).
(6) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(7) Remove the control panel (2).

[Rev.10 from 2021] 2026.04.01 06:27:29 UTC