W DOC AIRBUS | AMM A320F

Removal of the Entrance Guides


TASK 25-52-48-000-001-A
Removal of the Entrance Guides


ZONE: 130
ZONE: 150
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 2M (6 FT)
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
No specific
AR
WARNING NOTICE(S)
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
130
FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
150
AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 25-52-46-000-001-A
Removal of the Y-Guide
TASK 52-30-00-860-001-A
Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 53-22-14-000-001-A
Removal of the Forward Cargo-Compartment Floor-Panels
TASK 53-42-14-000-001-A
Removal of the Aft Cargo-Compartment Floor-Panels Zone 150
3. Job Set-up
Subtask 25-52-48-010-050-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Open the forward and/or aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
   (2) Put the ACCESS PLATFORM 2M (6 FT) in position at the opening of the forward and/or aft cargo-compartment door(s).
   (3) Put the WARNING NOTICE(S) on the applicable control panel of the cargo loading system to tell persons not to use it.
Subtask 25-52-48-865-055-A ** ON A/C NOT FOR ALL
B. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
2000VUSEMI AUTO CLS-FWD3MYE08
2000VUSEMI AUTO CLS-FWD2MYE06
2001VUSEMI AUTO CLS-AFT103MYD08
2001VUSEMI AUTO CLS-AFT102MYD06
Subtask 25-52-48-010-053-B ** ON A/C NOT FOR ALL
C. Get Access
   (1) You must remove the Y-guide (Ref. AMM TASK 25-52-46-000-001) before you remove the entrance guide (5) at (FR25).
   (2) If necessary, remove the floor panels (Ref. AMM TASK 53-22-14-000-001). (Ref. AMM TASK 53-42-14-000-001).
4. Procedure
Subtask 25-52-48-020-050-F ** ON A/C NOT FOR ALL
A. Removal of the Entrance Guide
   (1) Remove the screws (1).
   (2) Lift and remove the entrance guide (5) and/or (6) and the plate (2).
[Rev.10 from 2021] 2026.03.31 23:38:28 UTC