Removal of the Door Microswitch of the Space Flex Lavatory

TASK 25-45-33-000-802-A
Removal of the Door Microswitch of the Space Flex Lavatory

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Door Microswitch of the Space Flex Lavatory

3. Job Set-up
Subtask 25-45-33-861-051-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-45-33-865-053-A ** ON A/C NOT FOR ALL

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
2000VU	LIGHT-LAV	1LQ	J01
2001VU	LAVATORY AFT-OCCUPIED	11WJ	B04

4. Procedure
Subtask 25-45-33-020-051-A ** ON A/C NOT FOR ALL

A. Removal of the Door Microswitch of the Space Flex Lavatory

Door Microswitch of the Space Flex Lavatory ** ON A/C NOT FOR ALL

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Open the lavatory doors (1) and get access to the door microswitches (2).
(3) Remove the screws (4).
(4) Remove the supports (3) together with the door microswitches (2).

[Rev.10 from 2021] 2026.04.01 12:33:09 UTC