Removal of the Lavatory Door

TASK 25-45-19-000-001-A
Removal of the Lavatory Door

ZONE: 200

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Lavatory Single-Blade Door
Lavatory Bi-folding Door

3. Job Set-up
Subtask 25-45-19-861-050-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-45-19-020-051-A

A. Removal of the Lavatory Single Blade Door

Lavatory Single-Blade Door

(1) Open the lavatory single blade door (1).
(2) Remove the screw (2) and the washer (6) and disconnect the door stop (3).
(3) Remove the screws (4) and the lavatory single blade door (1).

Subtask 25-45-19-020-050-A

B. Removal of the Lavatory Bi-folding Door (Standard Option)

Lavatory Bi-folding Door

(1) Release the door latches (5) and open the lavatory bi-folding door (1).
(2) Release the damper (2) from the lavatory wall bracket (3).
(3) Loosen the screw (4) until you can slide down and disengage the upper pivot pin of the bi-folding door (1) from the door frame.
(4) Remove the bi-folding door (1).
(5) Remove the screws (10) and (11) and the fitting (9).
(6) Remove the screws (13) and the guide (12).

[Rev.10 from 2021] 2026.04.01 06:16:55 UTC