Removal of the Access Door in the Lavatory

TASK 25-45-18-000-002-A
Removal of the Access Door in the Lavatory

ZONE: 200

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Access Door Inside the Lavatory

3. Job Set-up
Subtask 25-45-18-861-051-A

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 25-45-18-020-051-A

A. Removal of the Access Door Inside the Lavatory

Access Door Inside the Lavatory

(1) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(2) Release the latch (5) and open the access door (4).
(3) Remove the nuts (6), the screws (9) and the washers (8).
(4) Remove the bracket (7).
(5) Pull the access door (4) down to release it from the bracket (1).
(6) If the bushes (2) are installed, remove them.
(7) Remove the pins (3).
(8) Remove the access door (4).

[Rev.10 from 2021] 2026.03.31 23:36:06 UTC