Removal of the Hot-Plate

TASK 25-35-36-000-001-A
Removal of the Hot-Plate

ZONE: 200

1. Reason for the Job
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Hot-Plate

3. Job Set-up
Subtask 25-35-36-861-050-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-35-36-860-053-A ** ON A/C NOT FOR ALL

B. Aircraft Maintenance Configuration
(1) At the related galley on the Galley Control Panel:
(a) Open, safety and tag the related circuit breaker(s) of the hot-plate.

4. Procedure
Subtask 25-35-36-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Hot-Plate

Hot-Plate ** ON A/C NOT FOR ALL

WARNING: DO NOT TOUCH THE UNIT UNTIL IT IS SUFFICIENTLY COOL TO PREVENT BURNS WHEN YOU DO THE MAINTENANCE TASK(S).

(1) Disconnect the electrical connector (1).
(2) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
CAP - BLANKING
(3) Remove the screws (5) and the panel (4).
(4) Carefully remove the hot-plate (7).

[Rev.10 from 2021] 2026.03.31 23:34:40 UTC