Removal of the Galley Control Panel

TASK 25-35-34-000-001-A
Removal of the Galley Control Panel

ZONE: 200

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

C. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Galley Control Panel

3. Job Set-up
Subtask 25-35-34-861-050-A

A. Energize the Ground Service Network (Ref. AMM TASK 24-42-00-861-001)

Subtask 25-35-34-865-053-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	ELEC/GALLEY/CNTOR	7MC	S28
122VU	ELEC/GALY & CAB/CTL	1XA	S26
** ON A/C NOT FOR ALL
123VU	AFT GALLEY/FEEDER A	3MC	AF04
** ON A/C ALL
123VU	FWD GALLEY/FEEDER F	16MC	AC10
123VU	AFT GALLEY/FEEDER E	14MC	AF09
** ON A/C NOT FOR ALL
123VU	AFT GALLEY/FEEDER B	12MC	AD09
123VU	FWD GALLEY/FEEDER D	2MC	AD04
123VU	FWD GALLEY/FEEDER C	1MC	AE10
** ON A/C NOT FOR ALL
123VU	FWD GALLEY/FEEDER D	2MC	AE02

4. Procedure
Subtask 25-35-34-020-050-A

A. Removal of the Galley Control-Panel

Galley Control Panel

(1) Remove the screws (1).
(2) Carefully pull the galley control-panel (2) out of the galley.
(3) Disconnect the electrical connectors (3).
(4) Remove the galley control-panel (2) from the galley.
(5) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.

[Rev.10 from 2021] 2026.04.01 06:12:19 UTC