Removal of the Mirror

TASK 25-24-41-000-803-A
Removal of the Mirror

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	STEPLADDER 0.5 M (1.6 FT)
No specific	AR	WIRE - SOFT, FLEXIBLE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power

3. Job Set-up
Subtask 25-24-41-860-059-A ** ON A/C NOT FOR ALL

A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
(2) Put a STEPLADDER 0.5 M (1.6 FT) near the related Overhead Stowage Compartment (OHSC).
(3) Remove and identify the equipment which is kept in the OHSC.

4. Procedure
Subtask 25-24-41-020-070-A ** ON A/C NOT FOR ALL

A. Removal of the Mirror
(1) This procedure is applicable for KomyMirrors.
(2) Make match marks on the components that you disconnect/remove to record their connections/positions. This is important for the subsequent installation procedure.
(3) Open the door of the OHSC.
(4) With your two hands, pull a thin WIRE - SOFT, FLEXIBLE with tension.
(5) Put the WIRE - SOFT, FLEXIBLE in position on the top of the mirror.
(6) Pull the WIRE - SOFT, FLEXIBLE between the adhesive tape and the wall of the OHSC.
(7) Remove the mirror gradually and carefully to prevent damage to the wall.

[Rev.10 from 2021] 2026.03.31 23:32:12 UTC