Removal of the Power Outlet Unit

TASK 25-18-11-000-801-A
Removal of the Power Outlet Unit

FIN: 4NA ** ON A/C NOT FOR ALL
FIN: 5NA ** ON A/C NOT FOR ALL

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Power Outlet Unit

3. Job Set-up
Subtask 25-18-11-861-050-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-18-11-865-050-A ** ON A/C NOT FOR ALL

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	PILOTS OUTLETS/STAT INV	1NA	K25
121VU	PILOTS OUTLETS/115V 60HZ	2NA	K23

4. Procedure
Subtask 25-18-11-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Power Outlet Unit

Power Outlet Unit ** ON A/C NOT FOR ALL

CAUTION: WHEN YOU REMOVE THE SCREWS AND WASHERS OF THE POWER OUTLET UNIT, BE CAREFUL NOT TO CAUSE DAMAGE TO THE ELECTRICAL CONNECTORS.

(1) Remove the screws (4) and the washers (5).
(2) Disconnect the electrical connectors from the power outlet unit (2).
(3) Put the CAP-BLANKING on each disconnected electrical connector and receptacle.
(4) Remove the screws (3).
(5) Remove the power outlet unit (2) from the VU panel (1).

[Rev.10 from 2021] 2026.03.31 23:29:34 UTC