DOC AIRBUS | AMM A320FInstallation of the Flight-Deck Eye-Position Ball-Mount Assembly
TASK 25-13-41-400-802-A
Installation of the Flight-Deck Eye-Position Ball-Mount Assembly
Self explanatory
2. Job Set-up Information
A. Consumable Materials
B. Referenced Information
3. Job Set-up
Subtask 25-13-41-860-050-A
Subtask 25-13-41-420-057-A
Subtask 25-13-41-410-051-A
[Rev.10 from 2021]
2026.03.31 23:29:05 UTC
Installation of the Flight-Deck Eye-Position Ball-Mount Assembly
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Consumable Materials
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.04JMD9) | Top Coat Polyurethane-- Decorative Furnishing |
| No specific | ASNA 3687-5332 RED-COLOR |
| No specific | ASNA 3687-5339 WHITE-COLOR |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 56-11-11-000-001-A | Removal of the Windshield |
| TASK 56-11-11-000-001-A-01 | Removal of the Windshield |
| TASK 56-11-11-400-001-A | Installation of the Windshield |
| TASK 56-11-11-400-001-A-01 | Installation of the Windshield |
Flight-Deck Eye-Position Ball-Mount AssemblySubtask 25-13-41-860-050-A
A. Aircraft Maintenance Configuration
(1) Make sure that vertical lining panel 211MW is removed (Ref. AMM TASK 56-11-11-000-001).
Subtask 25-13-41-160-050-A (1) Make sure that vertical lining panel 211MW is removed (Ref. AMM TASK 56-11-11-000-001).
B. Preparation for Installation
(1) Make sure that the removed flight-deck eye-position ball-mount assembly (3) is clean and in the correct condition.
(2) If necessary, apply a layer of Top Coat Polyurethane-- Decorative Furnishing (Material No.04JMD9) to the eye-position balls.
4. Procedure(1) Make sure that the removed flight-deck eye-position ball-mount assembly (3) is clean and in the correct condition.
(2) If necessary, apply a layer of Top Coat Polyurethane-- Decorative Furnishing (Material No.04JMD9) to the eye-position balls.
NOTE: The paint references with color designation used are:
ASNA 3687-5339 WHITE-COLOR
ASNA 3687-5332 RED-COLOR
ASNA 3687-5339 WHITE-COLOR
ASNA 3687-5332 RED-COLOR
Subtask 25-13-41-420-057-A
A. Installation of the Flight-Deck Eye-Position Ball-Mount Assembly
(1) Put the flight-deck eye-position ball-mount assembly (3) on the support (1) in correct position.
(2) Make sure that the red color ball is opposite the aircraft direction.
(3) Install the screws (2) and tighten them.
5. Close-up(1) Put the flight-deck eye-position ball-mount assembly (3) on the support (1) in correct position.
(2) Make sure that the red color ball is opposite the aircraft direction.
(3) Install the screws (2) and tighten them.
Subtask 25-13-41-410-051-A
A. Close Access
(1) Install vertical lining panel 211MW in the cockpit (Ref. AMM TASK 56-11-11-400-001).
(2) Make sure that the work area is clean and clear of tools and other items.
(1) Install vertical lining panel 211MW in the cockpit (Ref. AMM TASK 56-11-11-400-001).
(2) Make sure that the work area is clean and clear of tools and other items.