Removal of the Fourth-Occupant Seat Safety-Harness

TASK 25-11-83-000-801-A
Removal of the Fourth-Occupant Seat Safety-Harness

ZONE: 211
FIN: 13MM

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
TASK 25-11-42-000-001-A	Removal of the Fourth Occupant Seat
Fourth-Occupant Seat Safety-Harness

3. Job Set-up
Subtask 25-11-83-861-050-A

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

Subtask 25-11-83-010-050-A

B. Remove the headrest from the fourth-occupant seat (Ref. AMM TASK 25-11-42-000-001).

4. Procedure
Subtask 25-11-83-020-050-B

A. Removal of the Fourth-Occupant Seat Safety-Harness

Fourth-Occupant Seat Safety-Harness

(1) Open the seat (12) and put the SHIM - WOODEN to hold it in this open position.
(2) Make marks on all the parts before you remove them. This will help you to install them correctly.
(3) Remove the bottom cushion (11) "attached with the Velcro tapes" from the seat (12).

NOTE: The seat bottom cushion (11) includes the cover and the foam.

(4) Remove the screws (9) and the clip (8).
(5) Remove the crotch strap (10) and the shim (7).
(6) Remove the circlips (5) and the pins (6).
(7) Remove the lap strap buckles (4).
(8) Disconnect the cable (3).
(9) Remove the screws (2).
(10) Remove the reel assembly (1).

[Rev.10 from 2021] 2026.03.31 23:28:32 UTC