Removal of Reading Light Lens

TASK 23-73-64-000-802-A
Removal of Reading Light Lens

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	SCREWDRIVER - SMALL
8PE455838-00	1	TOOL-ADJUSTMENT,READING LIGHT

B. Referenced Information

REFERENCE	DESIGNATION
TASK 24-42-00-861-001-A	Energize the Ground Service Network from the External Power
Reading Light Lens ** ON A/C NOT FOR ALL
Reading Light Lens ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 23-73-64-861-054-A ** ON A/C NOT FOR ALL

A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).

4. Procedure
Subtask 23-73-64-020-052-A ** ON A/C NOT FOR ALL

A. Removal of the Reading Light Lens.

Reading Light Lens ** ON A/C NOT FOR ALL

(1) Make sure that the related reading light is off.
(2) Carefully remove the lens (1) with a SCREWDRIVER - SMALL from the reading light (2).
(3) Clean the component interfaces and the adjacent area.
(4) Do an inspection of the component interfaces and the adjacent area.

Subtask 23-73-64-020-052-B ** ON A/C NOT FOR ALL

A. Removal of the Reading Light Lens.

Reading Light Lens ** ON A/C NOT FOR ALL

(1) Make sure that the related reading light is off.
(2) Remove the lens from the reading light:
(a) Carefully push the suction end (4) of the 8PE455838-00 TOOL-ADJUSTMENT,READING LIGHT (3) onto the lens (2) of the reading light (1).
(b) Make sure that you fully compress the suction end (4).
(c) Do not touch the pushbutton (5).
(d) Pull the 8PE455838-00 TOOL-ADJUSTMENT,READING LIGHT (3) down to remove the lens (2) from the reading light (1).
(e) Press the pushbutton (5) to release the lens (2).
(f) Remove the lens (2).
(3) Clean the component interfaces and the adjacent area.
(4) Do an inspection of the component interfaces and the adjacent area.

[Rev.10 from 2021] 2026.04.01 05:38:59 UTC